Polycom RMX 1500 Administrator's Manual page 945

Hide thumbs Also See for RMX 1500:

Table of Contents

Secure Communication Mode

Switching to Secure Mode

The RMX can be configured to work in Secure Mode by configuring the

RMX and the RMX Web Client to work with SSL/TLS.

In this mode, a SSL/TLS Certificate is installed on the MCU, setting the

MCU Listening Port to secured port 443.

TLS is a cryptographic protocol used to ensure secure communications

on public networks. TLS uses a Certificate purchased from a trusted third

party Certificate Authority to authenticate public keys that are used in

conjunction with private keys to ensure secure communications across

the network.

The RMX supports:

SSL 3.0 (Secure Socket Layer)

Both TLS 1.0 and SSL 3.0 utilize 1024-bit RSA public key encryption.

The following operations are required to switch the RMX to Secure Mode:

Purchase and Install the SSL/TLS certificate

Modify the Management Network settings

Create/Modify the relevant System Flags

Purchasing a Certificate

Once a certificate is purchased and received it is stored in the RMX and

used for all subsequent secured connections.

To create/purchase a certificate:

In the RMX menu, click Setup > RMX Secured Communication >

Create certificate request.

Rmx 4000 Rmx 2000