Video Resolutions In Cp; Video Resource Usage - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Polycom RMX 1500/2000/4000 Getting Started Guide

Video Resolutions in CP

The RMX always attempts to connect to endpoints at the highest line rate.

If the connection cannot be established, the RMX attempts to connect at

the next highest line rate at its highest supported resolution.

Depending on the line rate, the RMX sends video at the best possible

resolution supported by the endpoint regardless of the resolution

received from the endpoint.

The video resolution is also defined by the Quality settings:

Motion, when selected, results lower video resolution.

Sharpness, when selected, sends higher video resolution.

The combination of frame rate and resolution affects the number of video

resources required on the MCU to support the call.

Video resource usage is dependent on the participant's line rate,

resolution and video Quality settings.

Rmx 4000 Rmx 2000