Removing An Mcu From The Mcus Pane - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Getting Started Guide

Removing an MCU from the MCUs Pane

18-28
a
Select the MCU to disconnect and click the Disconnect MCU
button.
b
Right-click the MCU icon and then click Disconnect MCU.
The MCU icon changes to disconnected and any ongoing conference
running on that MCU will not be monitored in this RMX Manager;
they are removed from the Conferences pane. This MCU can still be
monitored and controlled by other users.
An MCU can be removed from the RMX Manager. This function should
be used if the MCU hardware was disconnected and removed from the
network.
To Remove an MCU from the list:
1
Use one of the following methods:
a
Select the MCU to disconnect and click the Delete
b
Right-click the MCU icon and then click Remove MCU.
A confirmation message is displayed.
2
Click OK to confirm or Cancel to abort the operation.
The MCU icon is removed from the MCUs pane.
button.