Polycom RMX 1500 Administrator's Manual page 677

Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
CONF_GATHERING
_DURATION_SECONDS
CP_REGARD_TO
_INCOMING_SETUP
_RATE
DELAY_BETWEEN
_H320_DIAL_OUT
_PARTY
(ISDN)
DISABLE_GW_
OVERLAY_INDICATION
Chapter 19-RMX Administration and Utilities
Description
The value of this System Flag sets the
duration of the Gathering Phase in seconds.
The Gathering Phase duration of the
conference is measured from the scheduled
start time of the conference.
Range: 0 - 3600
Default: 180
For more information see "Video Preview" on
page 2-45.
For use in the Avaya Environment.
If set to YES, the RMX calculates the line rate
for incoming calls in CP conferences,
according to the line rate which is declared by
the endpoint in the H.225 setup message.
If set to NO, the rate is calculated according to
the conference line rate regardless of the rate
in the H.225 setup message.
Default: YES.
The delay in milliseconds that the MCU waits
when connecting dial out ISDN and PSTN
participants.
Default: 1000
When set to NO (default), displays progress
indication during the connection phase of a
gateway call.
Set the value to YES to hide the connection
indications displayed on the participant's
screen during the connection phase of a
gateway call.
19-23