On Legacy Endpoints - Polycom RMX 1500 Administrator's Manual

Changing the Default Layout for Displaying Content on Legacy
Endpoints
The default layout that will be used to display Content on the screens of
legacy endpoints is defined by the system flag
LEGACY_EP_CONTENT_DEFAULT_LAYOUT.
The configured default layout is 1+4 (
change the default layout configuration by entering a new value for the
flag in the system configuration.
To modify system flags:
1
On the RMX menu, click Setup > System Configuration.
The System Flags dialog box opens.
2
In the MCMS_PARAMETERS tab
LEGACY_EP_CONTENT_DEFAULT_LAYOUT entry.
The Edit Flag dialog box is displayed.
3
In the Value field, enter the flag value for the required layout as
follows:
Table 2-10 LEGACY_EP_CONTENT_DEFAULT_LAYOUT Flag Values
Layout
Chapter 2-Additional Conferencing Information
CP_LAYOUT_1P4VER
double
,
Flag Value
CP_LAYOUT_1X1
CP_LAYOUT_1X2
CP_LAYOUT_1X2HOR
CP_LAYOUT_1X2VER
CP_LAYOUT_2X1
CP_LAYOUT_1P2HOR
). You can
click the
-
2-41