Enabling Hot Backup - Polycom RMX 1500 Administrator's Manual

Enabling Hot Backup

Slave, now active, remains the Master and the previous Master MCU,
when restarted, assumes the role of Slave MCU.
• No changes to the Slave MCU are permitted while it is functioning as
the Hot Backup. Therefore no ongoing conferences or reservations can
be added manually to the Slave MCU.
• If Hot Backup is disabled, all ongoing conferences and Reservations
backed up on the Slave MCU are automatically deleted.
• Master and Slave initial roles can be reversed only after all ongoing
conferences and Reservations are deleted.
• Changes to the Master MCU that require a System Reset can only be
made after Hot Backup is disabled.
To enable Hot Backup:
1
On the RMX menu, click Setup > Hot Backup.
The RMX Hot Backup dialog box is displayed.
2 Complete or modify the following fields:
Table 19-20 Hot Backup
Field
Hot Backup
Enabled
Chapter 19-RMX Administration and Utilities
Description
Select this check box to enable Hot Backup.
19-97