Polycom RMX 1500 Administrator's Manual page 37

Table 1-4 New Profile - General Parameters (Continued)
Field/Option
Video Switching
Operator
Conference
4
Click the Advanced tab.
Description
If the Operator Conference option is selected, this
option is disabled, and the selection is cleared.
When selected, the conference is in a special
conferencing mode which implies that all participants
must connect at the same line rate and use the same
video resolution. Participants with endpoints that do
not support the selected line rate and resolution will
connect as secondary (audio only).
For more information, see "Video Switching" on
page 2-24.
Select the video protocol and resolution:
•
H.264 720p30 (supported by all media cards)
MPM+ and MPMx cards only:
•
H.264 1080p30
•
H.264 720p60
• H.264 SD 30
Notes:
• High Definition Video Switching conferencing mode
is unavailable to ISDN participants.
Select this option to define the profile of an Operator
conference.
An Operator conference can only be a Continuous
Presence conference, therefore when selected, the
High Definition Video Switching option is disabled and
cleared.
When defining an Operator Conference, the Send
Content to Legacy Endpoints option in the Video
Settings tab is cleared and disabled.
For more information, see Chapter 8, "Operator
Assistance & Participant Move" on page 8-1.
Chapter 1-Conference Profiles
1-11