Polycom RMX 1500 Administrator's Manual page 513

13 Click the SIP Servers tab.
14 Define the Primary and Alternate SIP Server for this network Service.
•
Starting with Version 7.1, Registration of conferencing entities with the SIP
Servers was moved to the conferencing entities and is defined in the
Conference Profile.
•
If Microsoft Office Communications or Lync server are part of this network
service, a certificate must be created for this network service. If each
network connected to the RMX includes Microsoft Office Communications
or Lync server, separate certificates must be created and sent to the MCU
for each of these networks.
•
If the Network Service does not include a DNS, you must use the IP address
of the SIP Server instead of its name.
The field definitions of the SIP Servers tab are the same as for the
Default IP Network Service. For more information see the RMX 1500/
2000/4000 Administrator's Guide, "Click the SIP Servers tab." on
page 14-25.
15 Click the Security tab.
The field definitions of the Security tab are the same as for the Default
IP Network Service. For more information see the RMX 1500/2000/
4000 Administrator's Guide, "Click the Security tab." on page 14-28.
16 Optional. To configure the ICE environment, click the SIP Advanced
tab.
17 Modify the following fields:
Table 14-34 Default IP Network Service – SIP Advanced
Field
Server User Name
ICE Environment
Description
Enter the User name for this service as defined in
the Active Directory. For example, enter rmxNet2.
This field is disabled if the ICE Environment field is
set to None.
Select MS (for Microsoft ICE implementation) to
enable the ICE integration.
This field is disabled if the RMX is not running in
MPM+ Card Configuration Mode.
Chapter 14-Network Services
14-79