Polycom RMX 1500 Administrator's Manual page 679

Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
ENABLE_H239
ENABLE_H239_ANNEX
_T=YES
ENABLE_IP_REDIAL
ENABLE_EPC
ENABLE_TEXTUAL
_CONFERENCE
_STATUS=YES
Chapter 19-RMX Administration and Utilities
Description
When set to YES, Content is sent via a
separate Content channel. Endpoints that do
not support H.239 Content sharing will not be
able to receive Content
When set to NO, the Content channel is
closed. In such a case, H.239 Content is sent
via the video channel ("people" video)
enabling endpoints that do not support H.239
Content sharing to receive the Content in their
video channel.
Default: YES.
In H.239-enabled MIH Cascading, when MGC
is on level 1, enables sending Content using
Annex T.
In all versions up to version 7.0, when set to
YES (default), it enables re-dialing if H.323 or
SIP dial out calls fail.
In version 7.0 and later, this flag functionality
is replaced by the Auto Redialing check box
in the Profile Properties - Advanced dialog box
When set to YES (default), enables Polycom
proprietary People+Content.
When set to NO, disables this feature for all
conferences and participants.
Set the value of this flag to NO to disable Text
Indication. This setting is recommended for
MCUs running Telepresence conferences.
Default: YES.
19-25