Polycom RMX 1500 Administrator's Manual page 676

Polycom RMX 1500/2000/4000 Getting Started Guide
19-22
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
BONDING_NUM_CHAN
NELS _IN_GROUP
(ISDN)
BONDING_DIALING
_METHOD
(ISDN)
BURN_BIOS
Description
The number of channels in the bonding group
to be connected before dialing the next
sequential channel.
Default: 50
When set to:
•
SEQUENTIAL
The MCU initiates channel connections
sequentially until it reaches the number of
channels defined by the
BONDING_NUM_CHANNELS_IN
_GROUP flag.
When a channel is connected, dialing
begins for the next channel in the group.
• BY_TIMERS
The MCU initiates channel connections
sequentially using the values of the
BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
The first group of channels is dialed, using
the BONDING_CHANNEL_DELAY
between dialing attempts for each channel
in the group.
The RMX then implements the
BONDING_GROUP_DELAY, before
dialing the first channel of the next group.
Default: SEQUENTIAL
Although, not recommended, setting this flag's
value to NO will prevent BIOS upgrade.
Default: YES.