Polycom RMX 1500 Administrator's Manual page 961

Connecting to the Alternate Management Network
Access to the Alternate Management Network is via a cable connected to a
workstation. The Alternate Management Network is accessible only via the
dedicated LAN 3 port.
To connect to the Alternate Management Network:
1
Connect the cable between the RMX's LAN 3 port and the LAN port
configured on the workstation.
2
Start the RMX Web Client application on the workstation, by entering
http://169.254.192.10
browser's address line and pressing Enter.
The Login dialog box is displayed.
3
In the RMX Welcome Screen, enter the administrator's Username and
Password and click the Login button.
The RMX Web Client starts and the RMX can be managed in the same
manner as if you had logged on the Management Network.
Chapter G-Configuring Direct Connections to RMX
LAN 3 Port
(the Control Unit IP Address) in the
G-9