Polycom RMX 1500 Administrator's Manual page 194

Polycom RMX 1500/2000/4000 Getting Started Guide
3-30
6
There are two methods to define the dialing string:
A Using the MCU's IP Address and the Alias string.
B
Using only the Alias string (requires a gatekeeper).
Method A (If no gatekeeper is used):
In the IP Address field, enter the IP address of the Signaling Host of
the MCU hosting the destination conference (in the example,
MCU B).
In the Alias Name/Type field, enter the ID of the cascade-enabled Entry
Queue (EQ), the Conference ID and Password of the destination
conference (MCU B) as follows:
EQ ID#Destination Conference ID#Password (Password is optional).
F or E xa m p l e : 78 48 5 #2 40 0 6# 1 23 4
Cascade-enabled
EQ ID
Method B (Using a gatekeeper):
In the Alias Name field, enter the Prefix of MCU B, EQ ID, Destination
Conference ID, and Password, as follows:
MCU Prefix EQ ID#Conference ID#Password (Password is optional)
F o r E xa m p l e : 9 2 57 84 8 5# 24 0 06 # 12 34
MCU Prefix as
registered in the
gatekeeper
7
Click the Advanced tab.
Destination
Conference ID
Cascade-enabled Conference ID
EQ ID
Password (optional)
Password (optional)