Managing The Recording Process - Polycom RMX 1500 Administrator's Manual

Polycom RMX 1500/2000/4000 Getting Started Guide

Managing the Recording Process

12-10
Possible encryption setting of the recording link are summarized in
Table 13, "Recording Link Encryption Setting Based on System Configuration
Flag Setting".
Table 13 Recording Link Encryption Setting Based on System Configuration
Flag Setting
Profile Setting RSS Setting
Encryption Encrypted
selected
Encryption Encrypted
selected
Encryption Not Encrypted
selected
Encryption Not Encrypted
selected
Encryption not Not Encrypted
selected
Encryption not Encrypted
selected
When a conference is started and recording is enabled in its Profile, the
system will automatically start the recording if the Start Recording
parameter is set to immediately. If it is set to Upon Request, the system waits
for the chairperson or RMX user's request. Once the recording is initiated
for a conference, the MCU connects to the recording device (RSS 2000)
using the default Recording Link. The connection that is created between
the conference and the recording device is represented as a special
participant (Recording) whose name is the Recording Link. Once the
Recording Link
Flag Setting
Setting
NO Encrypted
YES Not Encrypted
NO No connection to
the Recorder
YES Not Encrypted
YES/NO Not Encrypted
YES/NO Not Encrypted