Rmx To Rmx Cascading - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

RMX to RMX Cascading

Level 1 (Master)

Dialing Direction

To establish the links between two RMXs requires the following

procedures be performed:

Establish the Master-Slave relationships between the cascaded

conferences by defining the dialing direction.

Create the Master and Slave conferences, defining the appropriate

line rate and whether it is a CP conference or HD Video Switching

Create a cascade-enabled Entry Queue for dial-in connections (you

create it once for all cascading links using the same line rate).

Create a cascade-enabled Dial-out Participant link in the Master or the

Slave conference (depending on the dialing direction).

Establish the Master-Slave relationships and the dialing direction

MIH Cascading conferences are linked in a master-slave relationship with

each other according to the dialing direction. It determines the definition

of the cascaded links and the Entry Queues. Dialing directions can be top-

down or bottom-up or up from level 4 to level 3 and from level 3 to level 2

and down from level 1 to level 2.

It is recommended to select one dialing direction (usually bottom up) for the

entire hierarchy to simplify the setup procedure.

Chapter 3-Cascading Conferences

Level 2 (Slave to Level 1)