Meeting Room Toolbar & Right-Click Menu - Polycom RMX 1500 Administrator's Manual

Meeting Room Toolbar & Right-click Menu
Table 4-2 Meeting Rooms List Columns (Continued)
Field
SIP The status of registration with the SIP server:
Registration •
•
•
•
The Meeting Room toolbar and right-click menus provide the following
functionality:
Table 4-3 Meeting Room Toolbar and Right-click Menus
Toolbar Right-click
button menu
New Meeting
Room
Delete Meeting
Room
Description
Not configured - Registration with the SIP Server was
not enabled in the Conference Profile assigned to this
conferencing Entity. In Multiple Networks configuration, If
one service is not configured while others are configured
and registered, the status reflects the registration with the
configured Network Services. The registration status with
each SIP Server can be viewed in the Properties -
Network Services dialog box of each conferencing entity.
Failed - Registration with the SIP Server failed. This may
be due to incorrect definition of the SIP server in the IP
Network Service, or the SIP server may be down, or any
other reason the affects the connection between the RMX
or the SIP Server to the network.
Registered - the conferencing entity is registered with the
SIP Server.
Partially Registered - This status is available only in
Multiple Networks configuration, when the conferencing
entity failed to register to all the required Network
Services if more than one Network Service was selected.
Description
Select this button to create a new Meeting
Room.
Select any Meeting Room and then click this
button to delete the Meeting Room.
Chapter 4-Meeting Rooms
4-5