Polycom RMX 1500/2000/4000 Getting Started Guide
15-42
5
In the Attributes list, select 16.000 kHz, 16Bit, Mono.
6
To save this format, click the Save As button.
The Save As dialog box opens.
7
Select the location where the format will reside, enter a name and
then click OK.
The system returns to the Sound Selection dialog box.
8
Click OK.
The system returns to the Properties for Sound dialog box.
9
Click OK.
The system returns to the Sound–Sound Recorder dialog box. You are
now ready to record your voice message.
To record a new audio message:
Regardless of the recording utility you are using, verify that any new audio
message recorded adheres to the following format settings: 16.000kHz, 16Bit,
Mono.
Make sure that a microphone or a sound input device is connected to
your PC.
1
On your PC, click Start > Programs > Accessories > Entertainment >
Sound Recorder.
The Sound–Sound Recorder dialog box opens.
2
Click File > New.