Video Display With Cif, Sd And Hd Video Connections - Polycom RMX 1500 Administrator's Manual

Video Display with CIF, SD and HD Video Connections

Although any combination of CIF, SD and HD connections is supported
in all CP conferences, the following rules apply:
• In a 1X1 Video Layout:
— SD: If the speaker transmits CIF, the MCU will send CIF to all
participants, including the SD participants. In any other layout
the MCU will transmit to each participant at the participant's
sending resolution.
— HD: The MCU transmits speaker resolution (including input
from HD participants) at up to SD resolution. If 1x1 is the
requested layout for the entire duration of the conference, set the
conference to HD Video Switching mode.
• In asymmetrical Video Layouts:
— SD: A participant in the large frame that sends CIF is displayed
in CIF.
— HD: Where participants' video windows are different sizes, the
RMX transmits HD and receives SD or lower resolutions.
• In panoramic Video Layouts:
— SD: Participants that send CIF also receive CIF.
— HD: the RMX transmits HD and receives SD or lower
resolutions, the RMX scales images from SD to HD resolution.
Setting the Maximum CP Resolution for Conferencing
The MAX_CP_RESOLUTION flag value is applied to the system during
First-time Power-up and after a system upgrade. The default value is
HD1080.
All subsequent changes to the Maximum CP Resolution of the system are
made by selections in the Max Resolution pane of the Resolution
Configuration dialog box.
Chapter 2-Additional Conferencing Information
2-7