Polycom RMX 1500 Administrator's Manual page 185

Hide thumbs Also See for RMX 1500:
Table of Contents

Advertisement

Creating a Cascade Enabled Dial-out/Dial-in Participant Link
The connection between two cascaded conferences is established by a
cascade enabled dial-out and dial-in participants, acting as a cascades
link.
The dialing direction determines whether the dial-out participant is
defined in the conference running on the Master MCU or the Slave MCU.
For example, if the dialing direction is from the Master conference on
level 1 to the Slave conference on level 2, the dial-out participant is
defined in the Master conference on level 1 and a dial-in participant is
defined in the Slave conference running on the MCU on level 2.
If the cascade-enabled dial-out participant always connects to the same
destination conference on the other (second) MCU, the participant
properties can be saved in the Address Book of the MCU for future
repeated use of the cascaded link.
To define the dial-out cascade participant link:
1
In the Conferences pane, select the conference.
2
In the Participants pane, click New Participant (
The New Participant - General dialog box is displayed.
Chapter 3-Cascading Conferences
).
3-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmx 4000Rmx 2000

Table of Contents