Polycom RMX 1500 Administrator's Manual page 858

Polycom RMX 1500/2000/4000 Getting Started Guide
Table B-1 Alarms (Continued)
Alarm Code
IP Network Service not found
ISDN/PSTN Network Services
configuration changed
License not found
Low Processing Memory
Low system Memory
Management Network not configured
MCU is not configured for AVF
gatekeeper mode
MCU reset
MCU Reset to enable Diagnostics mode
Missing Central Signaling configuration
MPL startup failure. Authentication not
received.
MPL startup failure. Management
Network configuration not received.
Music file error
No clock source
B-10
Alarm Description
Possible explanations:
•
IP Service not found in the Network Services list.
•
m_StatusRead IpServiceList.
Low Processing Memory:
Process is approaching memory utilization limit:
[Memory Utilization Percent]
Low system Memory:
The system exceeded 80% of memory usage.
The MCU was reset automatically or by the user.
MCU reset:
Reset cause: [reset source].
The music file played during the connection to the
conference cannot be accessed.
The system could not use any of the connected ISDN
spans as clock source