Polycom RMX 1500 Administrator's Manual page 812

Polycom RMX 1500/2000/4000 Getting Started Guide
Diagnostic Mode (RMX 1500/2000/4000)
20-30
LAN 0, LAN 1, LAN 2 Properties:
The RMX unit's chassis contains 3 external LAN connectors which
register the following information listed below. The information will
be refreshed every 8 seconds and also contains a peek detector to log
the maximal values, since the last peek values reset.
2
Click Close to return to the HW Monitor pane.
You cannot run diagnostics on the MPM card.
Diagnostic Mode is a debugging tool for performing hardware
diagnostics that detect malfunctions in the hardware component's
performance. Diagnostics are performed only for the MFA, CPU and
Switch (Cards: MPM+/MPMx, CPU, RTM IP and RTM ISDN). Two types
of Diagnostic Modes are available:
• Basic Mode