Polycom RMX 1500 Administrator's Manual page 215

MCU Prefix EQ ID##Conference ID##Password (Password is
optional)
For Example:
MCU Prefix as
registered in the
gatekeeper
5 Click the Advanced tab and in the Node Type field, select Terminal.
6
Click OK.
Setting the Flags on the RMX
When running conferences in mixed environment (RMX and MGC) there
may be small differences between the line rates each MCU is sending. In
the RMX 2000/4000, several flags must be set to ensure that these
differences will not cause the cascaded link to connect as Secondary and
that Content flows correctly between the cascaded conferences. This
procedure is performed once per RMX.
1 In the RMX Web Client menu, click Setup>System Configuration.
Chapter 3-Cascading Conferences
9251002##12001##1234
Cascade-enabled Conference ID
EQ ID
Password (optional)
3-51