Cards Monitor - Polycom RMX 1500 Administrator's Manual

Cards Monitor

The Cards Monitor tab displays the status of the selected tests being run
on the currently viewed card, i.e. slot 5, described below.
Table 20-22 Tests Monitoring - Card Monitor Parameters
Column
Unitid
Testname
Loop
Pass
Failed
Quick
Duration
Status
Description
The test ID number
The name of the test
Indicates the number of times the test will repeat
itself in succession.
Indicates the number of times the test passed
successfully.
Indicates the number of times the test failed.
Indicates the number of Quick tests that have been
run on the card.
The duration of the test (in seconds).
The card's current test status: Test in Progress or
Ready.
Chapter 20-RMX Hardware Monitoring
20-45