Polycom RMX 1500 Administrator's Manual page 667

Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
ISDN_IDLE_CODE_T1
ISDN_NUM_OF DIGITS
JITC_MODE
LAN_REDUNDANCY
LAST_LOGIN
_ATTEMPTS
Chapter 19-RMX Administration and Utilities
Description
The Idle code (silent), transmitted on the
ISDN T1 B channels, when there is no
transmission on the channels.
Default: 0x13
When using ISDN Overlap sending dialing
mode, this field holds the number of digits to
be received by the MCU.
Default: 9
When set to YES enables the Ultra Secure
Mode. When enabled, affects the ranges and
defaults of the System Flags that control:
• Network Security
•
User Management
•
Strong Passwords
• Login and Session Management
•
Cyclic File Systems alarms
Default: NO
For a list of flags affected when the Ultra
Secure Mode is enabled, see "JITC_MODE
System Flag" on page 19-38.
Enables Local Area Network port redundancy
on RMX 2000/4000 RTM LAN Card and RMX
1500 Lan ports on the RTM IP 1500.
Default: YES
Range: YES / NO
If YES, the system displays a record of the
last Login of the user.
Default: NO.
For more details, see "User Login Record" on
page 13-15.
19-13