Creating A Video Switching Profile - Polycom RMX 1500 Administrator's Manual

Creating a Video Switching Profile

A Video Switching enabled Profile must be created prior to running Video
Switching conferences.
Video Switching conferences, Entry Queues and Meeting Rooms are
created by selecting an Video Switching-enabled Profile and must be set
to the same line rate as the target conference.
To connect to an Video Switching conference via an Entry Queue, the
Entry Queue must be Video Switching enabled. It is recommended to use
the same Profile for both the target conference and Entry Queue.
To Create a Video Switching Enabled Profile:
1
In the New Profile – General tab, in the Line Rate field, select a bit rate
for the drop-down menu that is higher than the defined HD
threshold.
2
Select the Video Switching check box.
3
Select the resolution for the conference:
— H.264 720p30 (supported by all media cards)
MPM+ and MPMx cards only:
Chapter 2-Additional Conferencing Information
2-27