Polycom RMX 1500 Administrator's Manual page 974

Hide thumbs Also See for RMX 1500:

Table of Contents

Polycom RMX 1500/2000/4000 Getting Started Guide

The call reaches the Transit Entry Queue of the RMX and via IVR is routed

to the destination conference.

This method is added to the local connections and Matched URI and

Numerical Dialing methods available in Microsoft Office Communication

environment and the Numerical Dialing method available in the Lync

server environment.

The following table summarizes the dialing methods and its availability

in the various configurations.

Available dialing methods per Connection Type

Branch office

* To enable the Matched URI dialing in the federated environment to be able to

connect to the RMX SIP signaling domain, you must also configure the Office

Communications Server/Lync Server.

When federating an Office Communications Server/Lync Edge server

with another Office Communications Server/Lync server environment,

you need to include the FQDN of the Office Communications Server/

Lync Edge server as well as the SIP signaling domain for federated

environment. The SIP signaling domain is the FQDN of the Polycom

DMA system or a Polycom RMX system (when your deployment does not

include a DMA system).

For example, if company B wants to set up federation with company A

and receive and send SIP calls that will be handled by the Polycom SIP

signaling domain in company A, you need to add the FQDN of the

company A Office Communications Server domain as well as the SIP

signaling domain of company A to the list of internal SIP Server domains

supported by the company B Office Communications Server/Lync Server

environment.

For more information, see the Microsoft documentation and the Polycom®

Unified Communications Deployment Guide for Microsoft® Environments.

Rmx 4000 Rmx 2000