Polycom RMX 1500 Administrator's Manual page 661

Hide thumbs Also See for RMX 1500:

Table of Contents

System Flags – MCMS_PARAMETERS (Continued)

AUTHENTICATE_USER

_LOOP_BACK_IN

CASCADE_LINK_PLAY

Chapter 19-RMX Administration and Utilities

If the external database application is to be

used to verify that operators are authorized to

If the value of this flag is set to NO, the MCU

database is used to verify that operators are

authorized to log in to the MCU.

Note: If the flag is set to YES, the flow is first

to look in the internal DB and then go out to

the external one.

Flags for SE200 need to be added manually.

When set to YES the current speaker's

image is not sent back through the participant

link in cascaded conferences with conference

layouts other than 1x1.

Default: YES

Range: YES / NO

When set to YES, the RMX plays a tone

when a cascading link between conferences

is established. The tone is played in both

conferences.

This tone is not played when the cascading

link disconnects from the conferences.

The tone used to notify that the cascading

link connection has been established cannot

be customized.

Default value: NO.

The tone volume is controlled by the same

flag as the IVR messages and tones:

IVR_MESSAGE_VOLUME.

Rmx 4000 Rmx 2000