Polycom RMX 1500 Administrator's Manual page 673

Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
SESSION
_TIMEOUT_IN
_MINUTES
SITE_NAMES
_LOCATION
TERMINATE_CONF_
AFTER_CHAIR_
DROPPED
USER_LOCKOUT
Chapter 19-RMX Administration and Utilities
Description
If there is no input from the user or if the
connection is idle for longer than the number
of minutes specified by this flag, the
connection to the RMX is terminated.
Value: 0-99
0 - Session Timeout is disabled, however this
feature cannot be disabled when the RMX is
in Ultra Secure Mode.
Default: 0
Default (JITC_MODE=YES): 15
The default location of the Endpoint Name in
the video layout can be changed.
Default: DOWN CENTER = Bottom, centered
Range:
•
UP_RIGHT = Top, right justified
•
UP_LEFT = Top, left justified
• DOWN_RIGHT = Bottom, right justified
•
DOWN_LEFT = Bottom, left justified
•
UP_CENTER = Top, centered
• DOWN_CENTER = Bottom, centered
If YES, sets conferences to automatically
terminate if the Chairperson disconnects from
the conference.
Default: YES
If YES, a user is locked out of the system
after three consecutive Login failures with
same User Name. The user is disabled and
only the administrator can enable the user
within the system.
Default: NO
Default in Ultra Secure Mode: YES
For details, see "User Lockout" on
page 13-14.
19-19