Creating Multiple Virtual Recording Rooms On The Rss; Configuring The Rmx To Enable Recording - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Polycom RMX 1500/2000/4000 Getting Started Guide

Creating Multiple Virtual Recording Rooms on the RSS

If the environment includes a Polycom® RSS™ 4000 Version 6.0 Recording

and Streaming Server (RSS) and you want to associate Recording Links on

the RMX with Virtual Recording Rooms (VRR), created and saved on the

Polycom® RSS™ 4000 Version 6.0 perform the following operations on the

Modify the parameters of a recording Template to meet the recording

requirements.

Assign the modified recording Template to a VRR. The recording and

streaming server will assign a number to the VRR.

Repeat Step 1 and Step 2 for each VRR to create additional VRRs.

For more information see the RSS 4000 Version 6.0 User Guide.

To make recording possible the following components you must be

configured on the RMX:

Recording Link – defines the connection between the conference and

the recording system.

Recording-enabled Conference IVR Service – recording DTMF codes and

messages must be set in the Conference IVR Service to enable

"recording-related" voice messages to be played and to allow the

conference chairperson to control the recording process using DTMF

Recording-enabled Profile – recording must be enabled in the Conference

Profile assigned to the recorded conference.

If Multiple Recording Links are being defined for Virtual Recording Rooms

(VRRs), created and saved on the Polycom® RSS™ 4000 Version 6.0, the

MAXIMUM_RECORDING_LINKS System Flag in system.cfg can be

modified to determine the number of Recording Links available for

Range: 20 - 100

The flag value can be modified by selecting the System Configuration

option from the Setup menu. For more information, see "Modifying System

Flags" on page

Rmx 4000 Rmx 2000