Polycom RMX 1500 Administrator's Manual page 602

Polycom RMX 1500/2000/4000 Getting Started Guide
17-22
Table 17-3 New Gateway Profile Properties (Continued)
Option Description
First Phone Enter the first number in the Dial-in number range to
Number be used for dialing into the gateway. This number
must be part of the dial-in number range defined in the
selected ISDN/PSTN Network Service.
This field cannot be left empty. If left empty an error
message, Please enter the First Dial in Number is
displayed.
Length: 0-25 digits.
Note: This number must be numerically smaller than
the Last Dial-in Number in the range.
Last Phone Enter the last number in the Dial-in number range to
Number be used for dialing into the gateway. This number
must be part of the dial-in number range defined in the
selected ISDN/PSTN Network Service.
This field cannot be left empty. If left empty an error
message, Please enter the Last Dial in Number is
displayed.
Length: 0-25 digits.
Note: This number must be numerically larger than
the First Dial-in Number in the range.
Use Dial-In When selected - Dial-in numbers are used to
Numbers as automatically generate the dial string of the
Prefix Range destination endpoint or DMA Meeting Room or the IP
endpoint, skipping the interaction with the Gateway
IVR system for entering the destination ID. For more
details see "Direct Dial-in to Endpoints or DMA VMR
using Automatically Generated Destination Numbers"
on page 17-11.
When cleared - The participant must interact with the
IVR Service to enter the ID of the destination endpoint
of the DMA Meeting Room.