Polycom RMX 1500 Administrator's Manual page 299

5
Click the Welcome tab.
The New Conference IVR Service - Welcome dialog box opens.
6
Define the system behavior when the participant enters the
Conference IVR queue. For more information, see "Defining a New
Conference IVR Service" on page 15-9.
7
Click the Conference Chairperson tab.
The New Conference IVR Service - Conference Chairperson dialog box
opens.
8
If required, enable the chairperson functionality and select the
various voice messages and options for the chairperson connection.
For more information, see Table 15-4, "New Conference IVR Service
Properties - Conference Chairperson Options and Messages," on
page 15-14.
9
Click the Conference Password tab.
The New Conference IVR Service - Conference Password dialog box
opens.
10 If required, enable the request for conference password before
moving the participant from the conference IVR queue to the
conference and set the MCU behavior for password request for Dial-
in and Dial-out participant connections. For more information, see
Table 15-5, "New Conference IVR Service Properties - Conference Password
Parameters," on page 15-16.
11 Select the various audio messages that will be played in each case.
For more information, see Table 15-5, "New Conference IVR Service
Properties - Conference Password Parameters," on page 15-16.
12 Click the General tab.
The New Conference IVR Service - General dialog box opens.
13 Select the messages that will be played during the conference. For
more information, see Table 15-6, "Conference IVR Service Properties -
General Voice Messages," on page 15-17.
14 Click the Roll Call tab.
The New Conference IVR Service - Roll Call dialog box opens.
Chapter 8-Operator Assistance & Participant Move
8-5