Using Dtmf Codes To Manage The Recording Process; Conference Recording With Codian Ip Vcr - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Using DTMF Codes to Manage the Recording Process

Conferences List - Recording Tool bar buttons (Continued)

By entering the appropriate DTMF code on the endpoint, the chairperson

can Stop the recording (*74), Pause it (*75), or Start/Resume the recording

(*73). For more information on managing the recording process via DTMF

codes, see the RSS 2000 User's Guide.

Conference recording is available with Codian VCR 2210, VCR 2220 and

Recording between the RMX and the Codian VCR is enabled by adding an

IP participant to the recorded conference that acts as a link between the

conference and the recording device. This participant is identified as a

recording link to the Codian VCR according to the product ID sent from

the VCR during the connection phase, in the call setup parameters.

The video channel between the conference and the recording device is

unidirectional where the video stream is sent from the conference to the

If the Codian VCR opens a video channel to the conference - this channel is

excluded from the conference video mix.

To record a conference running on the RMX using Codian recorder:

>> In the conference, define or add a dial-out participant using the

Codian VCR IP address as the address for dialing.

Once added to the conference, the MCU automatically connects the

participant (the link to Codian VCR) and the recording is

automatically started on the Codian VCR.

Pause recording. This button toggles with the Start/

Resume button.

Chapter 12-Recording Conferences

Rmx 4000 Rmx 2000