Polycom RMX 1500 Administrator's Manual page 735

Table 19-15 System Information (Continued)
Field
Card Configuration
Mode
Chapter 19-RMX Administration and Utilities
Description
Indicates the MCU configuration as derived
from the installed media cards:
• MPM: Only MPM cards are supported.
MPM+ and MPMx cards in the system are
disabled. It is the mode used in previous
RMX versions.
From Version 7.1, MPM media cards are
not supported.
•
MPM+: Only MPM+ cards are supported.
MPM and MPMx cards in the system are
disabled.
•
MPMx: Only MPMx cards are supported.
MPM and MPM+ cards in the system are
disabled.
Note: When started with Version 7.0 installed,
the RMX enters MPM+ mode by default, even
if no media cards are installed:
•
The RMX only switches between MPM,
MPM+ and MPMx Card Configuration
Modes if MPM, MPM+ or MPMx cards are
removed or swapped while it is powered
on.
•
The Card Configuration Mode switch
occurs during the next restart.
• Installing or swapping MPM, MPM+ or
MPMx cards while the system is off will not
cause a mode switch when the system is
restarted - it will restart in the Card
Configuration Mode that was active
previous to powering down.
19-81