Automatic Dial String Generation - Polycom RMX 1500 Administrator's Manual

Automatic Dial String Generation

This string is composed of the DMA prefix as registered in the
gatekeeper and the ID of the virtual meeting room running on the
DMA. For example, if the DMA prefix is 25 and the target meeting
room ID is 8000 the participant enters 258000 followed by the # key.
The RMX creates a Gateway Session with two participants, the calling
participant and the link to the conference running on the DMA.
The administrator can now configure the Gateway Profile to automatically
generate and forward the dial string from the RMX Gateway Session to the
DMA in order to connect to the required DMA Meeting Room. When this
configuration option is selected, the participant does not need to interact
with the IVR Service.
Figure 18 Call Flow from ISDN Endpoint to Polycom DMA with Automatically
Generated Forwarded Dial String
Chapter 17-Gateway Calls
17-29