Polycom RMX 1500 Administrator's Manual page 680

Polycom RMX 1500/2000/4000 Getting Started Guide
19-26
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
FORCE_1X1_LAYOUT
_ON_CASCADED_LINK
_CONNECTION
FORCE_CIF_PORT_
ALLOCATION
FORCE_RESOLUTION
Description
When set to YES, the cascaded link is
automatically set to Full Screen (1x1) in CP
conferences forcing the speaker in one
cascaded conference to display in full window
in the video layout of the other conference.
Set this flag to NO when connecting to an
MGC using a cascaded link, if the MGC is
functioning as a Gateway and participant
layouts on the other network are not to be
forced to 1X1.
Default: YES
Sets the MCU to allocate one CIF video
resource to an endpoint, regardless of the
resolution determined by the Conference
Profile parameters. You can specify the
endpoint types for which resource allocation
can be forced to CIF resource, enabling other
types of endpoints to use higher resolutions in
the same conference.
Enter the product type to which the CIF
resource should be allocated. Possible values
are:
•
CMA Desktop - for CMA desktop client
•
VSX nnnn - where nnnn represents the
model number for example, VSX 8000.
Use this flag to specify IP (H.323 and SIP)
endpoint types that cannot receive wide
screen resolution and that were not
automatically identified as such by the RMX.
Possible values are endpoint types, each type
followed by a semicolon. For example, when
disabling Wide screen resolution in an HDX
endpoint enter the following string: HDX;
Note: Use this flag when the flag
SEND_WIDE_RES_TO_IP is set to YES.