Resetting The Rmx - Polycom RMX 1500 Administrator's Manual

Resetting the RMX

3
Install the ActiveX components on all workstations on the network
that connect to RMX systems.
The installation is done by the network administrator using a 3rd
party network software installation utility and is transparent to all
other users.
System Reset saves system configuration changes and restarts the system
with the latest settings.
To reset the RMX:
1 In the RMX Management pane, click the Hardware Monitor button.
The Hardware Monitor pane is displayed.
2
Click the Reset (
When the RMX system is reset, during RMX Startup the Progress Bar
appears at the bottom of the RMX Status pane.
Chapter 19-RMX Administration and Utilities
) button.
19-127