Chapter 1 Introduction To Univerge Sv8100; System Overview; Univerge Sv8100 Chassis Trunk And Port Capacities; Section 1 Overview - NEC UNIVERGE SV8100 Configuration Manual

Introduction to UNIVERGE SV8100
S
S 1
YSTEM
ECTION
UNIVERGE SV8100 is an NEC IP system that offers TDM capability, at a
competitive price. UNIVERGE SV8100 keeps a majority of the existing
features of previous NEC systems with newly added features as well.
UNIVERGE SV8100 is easy to install and provides remote maintenance
capability. A new line up of modular telephones include snap on colour
panels for a customized look, large LCDs, a large colour touch panel LCD,
IP capability, an information protection button, just to name a few of the
new design concepts.
The 9.5" chassis provides 48 total ports (32 digital terminals) and can
include any combination of stations and trunks below this number.
The new compact 19" chassis provides 80 digital station ports and can be
expanded, using three additional 19" chassis, to 368 digital station ports.
Through IP connection and additional chassis the system can be
expanded to a maximum of 512 station ports.
The interface boards are redesigned. The boards are smaller and are
front loaded in the UNIVERGE SV8100 chassis. The boards come with
two screw pins that easily screw into the chassis. The connectors face the
front of the chassis for easy access. The connector wires run through the
front of the chassis, providing easier installation.
UNIVERGE SV8100 C
S 2
ECTION
C
APACITIES
The UNIVERGE SV8100 CHS2U GW is a 9.5" chassis that has three
universal slots and one PSU. The standalone module provides 48 total
ports (32 digital terminals) and can include any combination of stations
and trunks below this number. Refer to
CHS2U GW Chassis on page 1-2
System Capacities – Trunks/Ports/Channels on page
Configuration Guide
O
VERVIEW
HASSIS
and
T P
RUNK AND ORT
Figure 1-1 UNIVERGE SV8100
Table 1-1 SV8100 Maximum
1-3.
Chapter
1
1 - 1