Motion Sfc Program Name - Mitsubishi Electric Q173CPU Programming Manual

Q series motion controller
Hide thumbs Also See for Q173CPU:
Table of Contents

Advertisement

6 MOTION SFC PROGRAMS

6.4 Motion SFC Program Name

Set the "Motion SFC program name" to the Motion SFC program No.0 to No.255
individually. (Make this setting in the "Motion SFC program management window" on
the Motion SFC program edit screen.)
Set the Motion SFC program name within 16 characters. Specify this Motion SFC
program name for a "subroutine call/start step (GSUB)" and "clear step (CLR)".
Motion SFC programs correspond to No.0 to No.255 and saved in a one program-for-
one file format. The preset "Motion SFC program name" is used as the file name of the
Motion SFC Program file for user file management. (Refer to Chapter "12 USER
FILES" for details.)
POINT
(1) It is can be set the Motion SFC program to any of No.0 to No.255. There are
no specific programs which have special roles.
(2) "$" cannot be used in the first character of the Motion SFC program name.
(3) " / : ; , . * ? " < > |" cannot be used in Motion SFC program name.
6 - 9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q173cpunQ172cpuQ172cpun

Table of Contents