Interrupt Instruction To The Other Cpu: S(P).Gint (Plc Instruction: S(P).Gint ) - Mitsubishi Electric Q173CPU Programming Manual

Q series motion controller
Hide thumbs Also See for Q173CPU:
Table of Contents

Advertisement

5 MOTION DEDICATED PLC INSTRUCTION

5.9 Interrupt Instruction to The Other CPU: S(P).GINT (PLC instruction: S(P).GINT )

Internal devices
(System, User)
Bit
Word
(n1)
(n2)
[Instruction]
SP.GINT
S.GINT
[Setting data]
Setting data
(n1)
(n2)
[Controls]
• Interrupt instruction to the other CPU (S(P).GINT)
Bit
Indirectly
File
Digit
specified
register
specified
[Condition]
Start command
Start command
(First I/O No. of the target CPU)/16
Value to specify actually is the following.
CPU No.1 : 3E0H, CPU No.2 : 3E1H, CPU No.3 : 3E2H, CPU No.4 : 3E3H
Interrupt instruction No. (0 to 15)
(Note-1) : Motion CPU cannot used CPU No.1 in the Multiple CPU configuration.
This instruction generates the interrupt to the Motion CPU by PLC program when the
execution instruction of S(P).GINT is started (OFF
The Motion CPU executes the active program (operation program status) processing
of the Motion SFC program set by "PLC interruption of the event task" at the interrupt
generation from the PLC CPU.
(1) This instruction is always effective regardless of the state of real mode/virtual
mode/mode switching when the operating system software of Motion CPU is
SV22.
(2) Motion CPU side is during DI (interrupt disable), event processing can make wait
even as for the EI (interrupt enable) instruction execution.
(3) SM390 turn on when the transmission of the instruction toward the target CPU
was completed. SM391 (S(P).GINT instruction execution completion flag) turned
on simultaneously.
Usable devices
MELSECNET/10
direct J \
device
Bit
Word
(Note) : Setting data (n1) to (D2) : Index qualification possible
Description
(Note-1)
5 - 46
Special
Index
function
register
module
Z
U \G
: Usable
SP.GINT (n1)
(n2)
S.GINT
(n1)
(n2)
ON).
Constant
Other
K, H
: Usable partly
Data type
16-bit
binary
16-bit
binary

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q173cpunQ172cpuQ172cpun

Table of Contents