16 COMMUNICATIONS VIA NETWORK
16.2.4 Network configuration which MELSECNET/10(H), Ethernet, CC-Link, RS-422/485
were mixed
(1) When the MELSECNET/10(H) or Ethernet is defined as "Network" and CC-Link or
RS-422/485 is defined as "Link", combination of whether to be able to access from
the programming software (GX Developer, SW6RN-GSV P, etc.) is shown
below.
Programming software
Programming software
Programming software
Programming software
Programming software
Programming software
Programming software
Programming software
(2) It can be accessed to 8 network points by setting the routing parameter in the
"Network".
(3) Because routing cannot access, it can access only the connected network. The
connected network can be selected by specifying the I/O No. of the module.
Network communications
CPU (C24)
Network
Link
CPU (C24)
Link
Network
Network
Link
CPU
Link
Network
CPU
CPU (C24)
Network
Link
CPU (C24)
Link
Network
Network
Link
Network
Link
Network
Link
CPU
16 - 7
CPU
CPU
Network
CPU
Link
CPU
CPU
: Usable
Usable/
unusable
: Unusable