Mitsubishi Electric Q173CPU Programming Manual page 105

1 OVERVIEW
• Motion Slot Setting (Motion CPU setting) in SW6RN-GSV P
• I/O Assignment Setting (PLC CPU setting) in GX Developer
(b) Motion slot settings
Set the modules controlled by the self CPU by the Motion Slot Settings
(Motion CPU setting) in SW6RN-GSV P. In GX Developer, set the slot for
Motion CPU control as the CPU number of the Motion CPU in I/O
Assignment Settings (PLC CPU setting).
(Note): Motion slot setting items are different depending on the operating system software.
1 - 84
Control CPU No.