Safely Remove The Memory Card - Siemens sinamics G120 Operating Instructions Manual

Low voltage inverters chassis devices with cu250s-2 control units and encoder evaluation

Hide thumbs Also See for sinamics G120:

Table of Contents

Safely remove the memory card

Data loss from improper handling of the memory card

If you remove the memory card when the converter is switched on without implementing the

"safe removal" function you may destroy the file system on the memory card. The data on

the memory card are lost. The memory card will only function again after formatting.

• Only remove the memory card using the "safe removal" function.

Procedure with STARTER

To safely remove the memory card, proceed as follows:

1. Go online.

2. In the Drive Navigatorselect the following screen form:

3. Click on the button to safely remove the memory card.

STARTER will tell you whether you can remove the memory card from the inverter.

You have now safely removed the memory card from the inverter.

Converter with CU250S-2 Control Unit

Operating Instructions, 01/2016, FW V4.7 SP6, A5E31759476B AE

Backing up data and series commissioning

7.1 Saving settings on a memory card