NEC Electra Elite IPK II System User Manual page 1167

Electra Elite IPK II
To program a key, press the Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Speed Dialing
Account Codes
Automatic Call
Distribution (ACD)
Codes Tables
Table 3-4 Function Key Codes by Feature
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 27
Operation: Press key +
bin + Line or Speaker key
Code: 28
Operation: Press key +
bin + Line or Speaker key
Code: 50
Operation: Press key +
Dial Account Code
Code: 10

Operation: Press key to
log in
Press key + 1 to log out or
0 to cancel
Code: 12

Operation: Press key
Code: 13

Operation: Press key
Code: 14

Operation: Press key +
Press 1 (Yes) or 2 (No)
Code: 15

Operation: Call busy
ACD agent + Press key
When you...
Dial a stored System Speed
Dialing number
Dial a stored Group Speed
Dialing number
Enter Account Codes
Basic Operation
Log in or out of an ACD
Group
Emergency Call
Place or receive an
Emergency Call
Rest Mode
Enable/disable Rest Mode
Out of Service
Take an ACD Group out of
Service (for Group
Supervisors only), or Taking
all ACD Groups out of service
(for System Supervisors only)
Terminal Monitor
Monitor an ACD Agent's
conversation
Document Revision 4C
Also See
Key Lamp Status
Srvc Code
None
#
None
None
On red when
logged in
Off when logged
out
On while calling
your supervisor or
after being
answered by your
supervisor
Flashing fast at the
supervisor while
ringing
On red when Rest
Mode enabled Off
when Rest Mode
disabled
On red when the
group is out of
service.
On red while
monitoring
Off when not
monitoring
+ bin
4 + bin

-
-
-
-
3 - 23