NEC Electra Elite IPK II System User Manual page 1173

Electra Elite IPK II
To program a key, press the Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes),
For this feature...
Trunk Groups
Trunk Queuing
Voice Response
System (VRS) (Park
and Page)
(Personal Greeting)
Voice Mail
Voice Over
Codes Tables
Table 3-4 Function Key Codes by Feature (Continued)
press the key and enter the code (e.g., 48 for Voice Over).
Use this key...
Code: 02 + TRK group

(1~9 or 001~200)
Operation: Press key
Code: 35
Operation: Hear busy
tone for Trk + Press key
Code: 17
Operation: Press key +
device type code +
requested data (depends
on device selected).
Code: 83 + code (0~4)
Operation: Press key
Code: 77 + extension or
Message Center number
Operation: Press key
Code: 78 + 0
Operation: Set up call +
Press key
Code: 48
Operation: Hear
Off-Hook Signaling tone +
Press key
When you...
Use a trunk group key to
access a Trunk Group
Camp-On or Queue for a
trunk
Set up Call Forwarding Off-
Premise, Selectable
Display Messaging, VRS
Park and Page and VRS
Personal Greeting
Use Voice Mail Service
Call Voice Mail or
leave a message
Use Voice Mail Record
Initiate or respond to Voice
Over
Document Revision 4C
Also See
Key Lamp Status
Srvc Code
On red when active
On red while
camped on
Flashes red
Flashes slowly
when monitoring
Flashes green on
your key for your
messages or
flashes red for the
Message Center
Slow Flash red
when active
On red when
responding Hold
Flash red when
listening
704
4

-
8

or
8
-
6
3 - 29