Table 5-7 Ip Gateway Options - NEC Xen Master System Hardware Manual

System Hardware Manual
The IP Gateway trunk board has the following options:

Table 5-7 IP Gateway Options

# Configuration
1 COI
2 COID
3 DID
4 TLI
4.13.2 Installation
The Gateway ETU can be installed in KSU slots that
support the applicable ETU simulated.
The IPT(4)-U13 ETU is converted to IPT(8)-U13 by
installing daughter board IPE(4)-U13 Unit.
Refer to Elite IP Gateway Installation Manual 750367.
4.13.3 LED Indications:
✆
HS
When Switch S1 is placed to PD, this LED lights red.
The IPT ETU starts shutdown. When shut down is
complete, this LED goes off along with all others to
indicate that the ETU can be removed from the KSU.
✆
CH8~1
Indicates the status of associated channel or trunk as
in COID/DID as follows:
Trunk Status
Not Installed or Idle
Incoming
Busy
✆
Live
Flashes red when ETU is receiving power from the
KSU.
✆
Ethernet Status
Two built-in LEDs (one green and one yellow) on the
RJ-45 indicate Ethernet connection status. The
yellow LED is On when the Ethernet link is up. The
green LED flashes to indicate activity.
Number of Ports
IPT(4) IPT(8)
4 8 S3~S7
4 8 S3 or S4
4 4 S3~S7
2 2 S3~S7
COID LED
Off
Off
On
May 2001
Installation Slot
Elite 48 Elite 192
S1~S8
S1~S4
S1~S8
S1~S8
DID LED
Off
On
On
5 - 147