NEC Electra Elite IPK II System User Manual page 1087

Electra Elite IPK II

15-02-37 Multiline Telephone Basic Data Setup – Voice Mail Message Wait Lamp Color (Version
1600 or higher required)
Select the Message Waiting flash pattern for the station that set the Message Waiting reminder.
0 = Green
1 = Red
(default: 1)

15-02-38 Multiline Telephone Basic Data Setup – Voice Mail Message Wait Lamp Cycle (Version
1600 or higher required)
Select the Message Waiting flash pattern for the station that set the Message Waiting reminder.
1 = Cycle 1
2 = Cycle 2(default)
3 = Cycle 3
4 = Cycle 4
5 = Cycle 5
6 = Cycle 6
7 = Cycle 7

15-03-03 Single Line Telephone Basic Data Setup – Terminal Type
Set all SLI ports used for Voice Mail as type 1.

15-03-16 Single Line Telephone Basic Data Setup – Special DTMF Protocol Send (Version 1500 or
higher required)
For each Analog port, Enable (1)/Disable (0) the ability to send the extension number of the
phone that forwarded to it when not assigned a VM port.

15-07-01 Programmable Function Keys
Assign a Voice Mail key to an extension. You must enter the Voice Mail key code (code 77)
followed by:
Your own extension number if you are setting up your own Voice Mail key.

A virtual extension number if you are setting up a Message Center key for a virtual extension.

A co-worker's extension number if you are setting up a Message Center key for an installed

extension.
An uninstalled extension number if you are setting up a Message Center key for an uninstalled

extension.
(Optional) Assign a Voice Mail Record key to an extension (code 78).
(Optional) Assign a Personal Answering Machine Emulation key (code 16).
(Optional) Use a Call Redirect key (49) to allow a user to transfer a call to another extension or
voice mail without answering the call.

16-02-01 Department Group Assignment for Extensions
Put all the Voice Mail extensions in a unique Department Group (do not use Department Group
1). No other extensions should be in this group. This allows DILs to Voice Mail to ring other
Voice Mail extensions when the DIL's assigned port is busy. Only one Voice Mail group is
allowed per system.

20-02-09 System Options for Multiline Telephones – Disconnect Supervision
Enable (1) disconnect supervision for the system.
(default: 1)
Voice Mail Integration (Analog)
Document Revision 4C
2 - 1063