Installation - Isuzu 1999 RODEO Workshop Manual

6. Remove twenty fixing bolts from intake and exhaust
camshaft bracket on the cylinder head, then remove
camshafts.
CAUTION:
f Do not damage camshaft lobe and journal.
f Do not damage hydraulic lash adjuster(HLA) and
do not allow into foreign materials into cylinder
head.
7. Remove oil seal from camshaft.

Installation

1. Clean surface of camshaft bracket and HLA.
2. Apply engine oil to journal surface of camshaft
bracket and HLA.
3. Install camshaft to cylinder head.
4. Install camshaft bracket according to numerical as
shown in the illustration.
The bracket number is:
f Exhaust: 1 to 5 from front
f Intake: 6 to 10 from front.
ENGINE MECHANICAL (X22SE 2.2L)
011RW015
6A–33
014RW052
015RW014