6. Remove evaporator assembly (A/C only).
f Refer to Evaporator Assembly in this section.
7. Disconnect blower motor connector.
8. Remove blower assembly.
Disassembled View
Legend
(1) Upper Case
(2) Mode Door
(3) Lower Case
Removal
1. Disconnect the battery ground cable.
2. Discharge
and
recover
conditioning).
f Refer to Refrigerant Recovery in this section.
HEATING, VENTILATION AND AIR CONDITIONING (HVAC) 1A–19
Blower Link Unit and / or Mode door
refrigerant
(with
Installation
To install, follow the removal steps in the reverse order,
noting the following point:
1. Adjust the control cables.
f Refer to Control Lever Assembly in this section.
(4) Sub Lever
(5) Door Lever
(6) Blower Assembly
3. Remove blower assembly.
f Refer to Blower Assembly in this section.
4. Remove lower case.
air
873RS001