4
Disconnect the negative battery cable.
Disconnect the instrument cluster
connector.
Connect the keyless control module
(without advanced keyless control
system)/keyless control module (with
advanced keyless control system)
connector.
Connect the negative battery cable.
Turn the ignition switch to the ON
position.
Does the security light illuminate?
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
YesReplace the keyless control module
(without advanced keyless control
system)/keyless control module (with
advanced keyless control system).
(See
KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)
No Repair the wiring harness.
Back to Top