< Previous Next >
2011 - RX-8 - Body and Accessories
REAR DOOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the rear seat cushion. (See
3. Remove the seat belt rail. (See
4. To remove the checker, remove the following parts:
a. Rear door lower trim (See
5. To remove the rear door hinge, remove the following parts:
a. Rear seat cushion (See
b. Tire house trim (See
6. Remove in the order indicated in the table.
REAR SEAT
FRONT SEAT BELT
REAR DOOR LOWER TRIM
REAR SEAT
REMOVAL/INSTALLATION.)
TIRE HOUSE TRIM
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)