Mazda RX-8 Workshop Manual page 3476

27Bolt C
28Screw I
29License plate holder
30Nut
31Mascot
32Front bumper fascia
Large Type
1. To disassemble the front bumper, remove the following parts:
a. Front fog lights (Vehicles with the front fog lights) (See
b. Headlight cleaner hose (Vehicles with the headlight cleaner) (See
c. Headlight cleaner nozzles (Vehicles with the headlight cleaner) (See
(SeeHEADLIGHT CLEANER NOZZLE
d. Headlight cleaner actuator (Vehicles with the headlight cleaner) (See
REMOVAL/INSTALLATION.)
2. Disassemble in the order indicated in the table.
3. Assemble in the reverse order of disassembly.
FRONT FOG LIGHT
INSTALLATION.)
REMOVAL/INSTALLATION.)
HEADLIGHT CLEANER HOSE
HEADLIGHT CLEANER NOZZLE
HEADLIGHT CLEANER ACTUATOR
REMOVAL/INSTALLATION.)
REMOVAL.)